Ways to improve the performance of Windows Vista
1. Increase your RAM.
The latest version of Windows Vista that has been pushed by Microsoft comes equipped with the requirement of at least 1 GB of RAM. This is a different requirement than Windows XP’s 512 MB. Also, if you like to use all those graphical features and need to work in multiple programs simultaneously, you might be better off with 4GB.
2. Apply the ReadyBoost function.
Adding system memory or RAM has always been considered the most efficient way to improve a PC’s performance, as more memory means more applications are ready to run without accessing the hard drive. However, the memory upgrade requires the owner to be a PC power user; otherwise, he will have to call a technician and pay a lot of time and money. Also, some machines have limited memory expansion capabilities, making it impossible to add more RAM. ReadyBoost is a new concept in additional Microsoft Windows system memory, first introduced with Windows Vista in 2006 and also included with Windows 7. It works with flash memory, USB 2.0 drive, SD card, CompactFlash or any type of portable flash drive . mass storage system such as a disk cache drive. The flash memory device serves as an additional memory cache, that is, memory that the computer can access much faster than it can access the data on the hard drive. The ReadyBoost-enabled flash application for caching enables Windows Vista to perform random disk reads with performance that is typically 80 to 100 times faster than traditional hard drive random reads.
3. Limit the loading of programs at startup
It will take longer to load more programs when Windows starts. Therefore, limiting the number of programs that are designed to load automatically when Windows starts is an effective way to speed up the performance of your system. But some kinds of programs need you to turn them off in a special way, because software makers often set their programs to open in the background, where you can’t see them running, so they’ll open immediately when you click their buttons. icons. . Check whether you use it frequently or not, as these programs waste valuable memory and slow down the time it takes for Windows to finish loading.
Even after checking the notification area, you may still have missed some programs that load automatically at startup. You can find and disable them using Windows Defender.
If you’re not sure whether a program should open automatically at startup, you can try disabling it, restarting your computer, and then using the program. If that causes any problems with the program, you can go back and re-enable it to start automatically.
4. Check for viruses and spyware.
Various types of files can be the best place for hidden spyware and malicious programs. Some types of spyware and malware can apply this place to attack your system indirectly and get your personal information for illegal profit. Therefore, you should invest in a great antivirus program with powerful search engine and detection capabilities to prevent, detect, and remove malware, including computer viruses, worms, Trojan horses, adware, spyware, and other forms of malware as soon as possible. .
5. Clean and defragment your hard drive.
A hard drive is designed to store and provide relatively fast access to large amounts of data on an electromagnetically charged surface or set of surfaces. It contains various types of files, including system and application location resources, operating system temporary files, video format files, etc. These various files not only often mess up your system until a temporary shutdown, but are also attacked by malwares. Some malicious programs get into your hard drive when you surf the internet to attack your whole system and steal your personal information to make illegal profit through these files. By freeing up space on your drive, your system will run faster and smoother than before. I apply QuuSoft Disk Defrag and QuuSoft Junk File Cleaner to fix my problem.
6. Delete the paging file
Paging serves as an important part of the virtual memory implementation in most contemporary general-purpose operating systems, allowing them to use disk storage for data that does not fit in physical RAM. The page file is usually implemented as architecture-specific code built into the kernel of the operating system. The main paging functions are performed when a program attempts to access pages that are not currently allocated to physical memory (RAM). This situation is known as a page fault. Windows keeps increasing and decreasing the size of the page file, which in itself is not very efficient. This affects the accessibility of the fragmentation of your files. You should define your own pagination size. Select the minimum and maximum virtual memory size to be the same. A preferable size is about twice the amount of RAM you have.
7.Temporary file cleanup
A temporary file is a file designed to hold information temporarily while a file is being created. They are used to help recover lost data if the program or computer stops abnormally. Temporary files can be created by computer programs for a variety of purposes; mainly when a program cannot allocate enough memory for its tasks, when the program is working on data larger than the architecture’s address space, or as a primitive form of inter-process communication. This can happen because the program crashed or the program developer simply forgot to add the necessary code to delete temporary files after the program has finished with them. In Microsoft Windows, temporary files left behind by programs accumulate over time and can take up a lot of disk space. After the program is closed, the temporary file must be deleted. Cleaning the temporary folder in your windows is very essential to get rid of all the unwanted files. These files are leftovers from programs you have uninstalled from your system or other unwanted files. If you don’t delete the contents of this temporary folder, the files could accumulate up to 100MB with virtually no use. Some programs create temporary files and then leave them behind; they don’t delete them.
If you browse the Internet with the help of the explorer, the temporary cache files should also be deleted from the Temporary Internet folder.
*To remove files from the Temporary Internet Files folder, follow these steps:
1. Quit Internet Explorer and exit any instance of Windows Explorer.
2. Click Start, then go to Control Panel, and then double-click Internet Options.
3. Find the General tab, under the General tab, see Temporary Internet Files and select Delete files under Temporary Internet Files.
4. In the Delete Files dialog box, click to select the Delete all offline content check box, and then click OK.
5. Click OK.
8. Turn off visual effects
If Windows is running slowly, you can speed it up by disabling some of its visual effects, such as sliding or fading menus, shadows for the mouse pointer and menus, and animations when windows are maximized/minimized, sacrificing the sake of mere increased beauty. . productivity. It’s all about looks versus performance. Would you rather Windows run faster or look prettier? If your PC is fast enough, you don’t have to make this trade-off, but if your computer is just powerful enough for Windows Vista, it can be useful to reduce visual bells and whistles.
You can choose which visual effects to turn off, one by one, or you can let Windows pick a bunch for you. There are 20 visual effects you can control, such as how transparent glass looks, how menus open or close, and whether shadows are displayed.
*To adjust all visual effects for best performance:
1. Click Start and then go to Control Panel. See System and maintenance, select it. See Performance Information and Tools, click on it.
2. Click Adjust Visual Effects. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. Click the Visual Effects tab, click Adjust for best performance, and then click OK.